The seeder and consists Vibro Seeder, of Kongskilde, is on display at Fima 2010

Hand in hand with Howard Ibérica, the seeder and consists pneumatic Vibro Seeder reaches Fima 2010. Kongskilde firm has manufactured this versatile machine, suitable for operations of minimum tillage in land without arar. During planting, behind the arm Kongskilde Vibro Till, takes place a good addition of waste in the field at the same time as is planting, albeit at greater depth. In short, is reduced the number of past and, consequently, the costs that may arise. Also, the depth of work is equal to the sowing. The seed is situated on firm ground, which accelerates the germination of the plant.

Basically, the Vibro Seeder consists seeder is equipped to offer a very good distribution of the seed. Each head of the machine has own dosage, the routes of tube are short and with few differences among them. In addition, sowing wheel has developed to provide an exact rotation gearbox Vario-K, very reliable and continuous. Also the grill of sowing is installed together with the vibrating arm, which protects and facilitates the return to the starting position after overcoming any obstacle. Thus, lives on the depth of the full product. Finally, control over the depth is obtained through low and wide flotation tires, while the compact design ensures a point of gravity close to the tractor, without renouncing a large capacity hopper.

FIMA 2010 is also the scene in which released other equipment marketed by Howard Iberian. It is the case of coach ST400, with three bodies. The first, so far, with independent bodies and hydraulic folding. Its operation relieves of other predecessors as preparers ST 400 and 600. With a rotor of reverse swing and rubber hood, this effect is able to prepare a bed of sowing or planting avoiding the presence of stones on the surface. This machine, thanks to the option of beamformer or roller, allows the user to choose the finish of the field, depending on the characteristics of the crop. Having three bodies, increases the width of work and are shortened significantly, working times. Once folded, this conveyor can be transported comfortably by road.