The coupling K80 of Scharmüller, adaptable to any tractor, arrive at Fima 2010

Compatible with the majority of tractor brands available on the market. The next edition of Fima 2010 will show the system of hooks of ball K80 of Scharmüller, firm that distributes commercial Agrinava to Spain and Portugal. It's rear racks designed for heavy loads. Its chassis, with ball K80, allows up to six tons of vertical load and tyre, also with ball K80 bar, four tons of vertical load. In addition to an optimal behavior with maximum freedom, about 30 degrees of movement in all directions, these pieces do not produce blows nor jerks, unlike other conventional systems. His behavior on the vehicle is optimal: workspace and decouple easily, even in difficult terrain, and have adjustable safety stop, between 0.5 mm and 1 mm of clearance.

Ball K80 of Scharmüller coupling system reaches the market equipped with sliding plate of ball with a superior position of no more than 2 tons of vertical load and a lower maximum of 3 tons of cargo. It is therefore a spare adjustable in height, and subject to the standard ISO 24347. The K80 cups are available for all Spears and current adaptations, even for welding. Another advantage to the Professional is its low-maintenance, only need periodic lubrication.