This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Serrat Trituradoras presenta en Sant Miquel su nuevo sistema ‘Floting’

Two years of intensive work have enabled the Huesca company bring to market a totally innovative system

Serrat crushers presents its new 'floting' system in Sant Miquel

Drafting Interempresas09/09/2009

September 9, 2009

The 'Floting' is an innovative system of positioning and adaptable, in this case to an interárboles control, but it might be useful in any other accessory mounted on a machine, for example, brushes of sweeping pruning, bars of fumigation, etc., and always and when this accessory is the need to control both the distance and the pressure on the soil. In the example here exposed by Serrat crushers we study it by controlling a dish interárboles mounted on a wood chipper.

A main arm of long records on the back of the machine with spherical systems spherical with total freedom of movement. The arm is guided in parallelogram with bearings, adjustable in length from the center of the arm, so you can get the proper positioning and also keep it when there is the lifting and lowering the implement.

Logo of the new 'floting' system.

The system is controlled by a mechanical adjustable spring pressure for the perfect control of the force exerted on the soil, and for which rises on the lower disk or skids with very little effort, less than 5 kg.

The 'floting' system on a plate interárboles mounted on a wood chipper.

System designed for efficient work

With the system 'floting' efforts that is submitted to the main arm in turns, are reduced unevenness of the terrain and feel when a tree. If the plate detects any obstacle begins to retreat and at the same time also varies its position in length and rises with greater ease and in a manner more quickly, thereby increasing the effectiveness against the unforeseen and impediments which we find ourselves in the field. The variation of height is 0 to 400 mm, and can thus save any obstacle in the street.

Its position has all the possibilities with the combination of regulation on cross between all the joints:

· Parallelograms in the central arm.

· Angle to the mota.

· Angle of attack.

· Working height.

· Control of pressure to the ground.

· Control of recoil of the dish.

The throwback to the tree is performed by a damper of gas to avoid setbacks against the tree to be sudden

This system reduces the effort that is submitted to the main arm in turns, unevenness of the ground and when a tree can be seen.

It is very important to note, that the setback to the tree, is done by a damper of gas, to avoid setbacks against the tree to be abrupt, and on the other hand, efforts supported by all the joints and mechanisms of the machine are minimal, thereby producing a high mechanical reliability and a long duration, aspect very important, since that existing systems in the market have major reliability problems.

The dish of 800 m/m. has a protective outer rubber and mounted on bearings so that the shift and control is always smooth and without hooked.

The dish has a protective outer rubber and mounted on bearings.

Arm can be flipped vertically for the transport, reducing the dimensions and weight approaching the tractor to increase security.

Ventiladoras blades exert a large force of depression to the ground, absorbing the grass and facilitating his court. The lower plate with sealed bearings also serves to prevent elements of Court touch to the ground and there is a minimum depth control.

The hydraulic station of the system is independent, 60 HP of power, operated from the multiplier in its output shaft has a refrigerator with electroventilador automatic built-in and advisory acoustic, start/stop valve plate for control of pressure, pressure gauge of control to the view of the operator and a deposit of 120 liters.

Ventiladoras blades exert a large force of depression to the ground, absorbing the grass and facilitating his court.

A draw unprecedented in Fira of Sant Miquel

Serrat crushers will perform a drawing of an agricultural crusher, model Trigón Evolution T-1800, during the fifty-fifth edition of Fira of Sant Miquel. The draw will be aimed at all persons visiting the fair, which after duly fill in a ballot paper delivered at the entrance of the fair, or in the own stand of Serrat crushers, can deposit later in one of the pollslocated for the purpose at the stand of Serrat. To gain access to the prize, the winner must show as a farmer in active. The draw will take place, in the own stand of Serrat crushers, Tuesday, September 29 at 5 p.m.. Where the gracious person is not present at that time, the direction of Serrat will contact with her to make delivery of the machine in his own estate.

This event, is a consequence of special thanks, Serrat crushers wants to demonstrate to each and every people, customers, or not, who daily bet on this Huesca signature. For Serrat crushers, explains a person in charge of the company, "it is essential to be able to reach all the current and future customers in a direct way, another different way of maintaining trade relations, more staff, counselor, and much more technical at the same time to convey them"", thanks to its constant research in the world of the crushed".