This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Un proyecto con la marca Terex

The TL 80 model enriches the Park of machines of the company for horticulture and landscaping

A project with the Terex brand

Drafting Interempresas13/02/2009

February 13, 2009

Karl-Josef Holz has just completed a work of great embergadura in the Schaumberg, the most famous mountain in the State of Saarland (Germany), near the city of Tholey. The Mount of Schaumberg, 569 meters high, with its remarkable silhouette made up of a viewpoint and a wind wheel, belongs to one of the most favorite tourist destinations in the center of the territory of the German Saarland. In the access of the Southeast flank at the entrance and the parking of the leisure facilities are necessary to already for a long time improving these facilities. To this end, continuing the tradition of more than 20 years, Karl-Josef Holz counted with the collaboration of Terex.

With up to 17 workers and 4 Terex machines the horticulture and landscaping of Karl-Josef Holz company undertook such work in July 2008 in the Schaumberg mountain. There were mini excavators TC16 and TC35, swivel loader TL70s and a completely new TL80. As a result of the remodelling of the access and parking facilities moved in part the track. The surface of the parking lot was affirmed with paving stones and stabilized with steep slopes.

Recommended machinery

Karl-Josef Holz relied for its purchase in the Council of experts of Mann + Magar in Merzig, where one of the distributors of major construction machinery and with the more long tradition in the region of the Saar river. "With the machines and Terex conditions provided by Mann + Magar was always very happy." "Never there was problems" it adds Karl-Josef Holz. Since for two decades comes to mind the use of machines for Terex, "which practically never ceased to function due to a failure", added.

The TL80 of Terex was primary for any type of use in the work in Schaumberg

Especially the new TL80 is an enrichment of the Park of machines of the company of horticulture and landscaping. The TL80 was the primary computer for any type of use in the work in Schaumberg. To maneuver, push and move material loader with Swivel addressing TL80 demonstrated its good characteristics obtained construction: still in the pivotado State at 40 °, this loader can penetrate directly into the material with all its strength of thrustYou can position palettes exactly, and move away. In the case of the loader with Swivel addressing of 4.9 tonnes bucket remains absolutely the way to a turning radius of 4135 mm.

The loader rotating TL80 of Terex in the works of Schaumberg (Germany).

Hydrostatic translation service is independent of the hydraulic loading system. The automatic system of March the force of traction and speed automatically optimizes in two speed ranges. Even with low-speed routing movements are quick and easy with the help of the Load-Sensing System. 60 CV silent and economical diesel engine allows a dynamic drive and strong working cycles. It is also optimized in exhaust gas emission level III of the EU directive to meet.

High power load and reliability

When the wheel loaders TL80 applied its strength, is a force of 45,000 N detachment and a force of 48,000 N. This compact loader that can load 1,440 kilos with a spoon of 0.8 cubic metres, is of the most powerful of its kind, but also one of the more economical thanks to its low weight. Parallel kinematics of robust loading equipment allows safe cargo reception and a driving parallel exactly the same on all the lifting height. The height of discharge is 2,550 mm, while the range of download is 700. The pivoting joint is almost maintenance-free and all other components are also of great reliability even when they are under extreme overload.

Comfortable is the large cabin for the driver, which has two doors and 85% of its surface is made of glass

Comfortable and ergonomically optimal is the large cabin for the driver, which has two doors and 85 per cent of its surface is made of glass. "Visibility is excellent," says Arni Schala, technical company, who feels at ease in the TL80. With spring in the driver seat is also one of its features and also large ground unevenness can be compensated by the oscillating rear axle (± 12 °) typical of Terex.

The compact loader can load 1440 kg with a spoon of 0.8 cubic metres.

Terex, a diversified company

Terex Corporation is a diversified company that built machines and operates worldwide reaching an annual turnover of 9.100 billion dollars (2007). Terex operates in five different business segments: lift platforms working, construction, cranes, treatment of materials and mining, and machines for the construction of roads, utility machinery and other products. Terex produces a broad range of equipment for different branches, among them the industry of construction and infrastructure, for the industry of extraction of stone and aggregates, to the processing industry of materials in raw and open-pit operation, to transport and supply companies.